Click to enlarge

From: Jeff Tolomeo
To: Bob
Sent: Friday, May 29, 2009 7:23 PM

Hello Bob.

For the Viper Jet this is what I did to mine.

Attached is the rudder removal mod and hinge mode I did to my viper. It works very well. Sorry, Drawling is kind of crude. I don’t have my solid works 6 program on this computer.

For the rudder hinge mod I put ¼” wooden blocks around the exposed hinge and hysoled them into place, then I drilled them for the hinge. This works great and I have no side to side or up and down movement in the rudder.

Thanks again  
Jeff Tolomeo
 

Contact Us
All graphics, photos, and text Copyright 2012 BVM, Inc.
Use of graphics or photos without written permission from BVM is strictly prohibited.