These shims can be used to reinforce the fiberglass flanges on the hatch shelf.  If the slot is a bit oversize, position the shim for the best hatch-to-fuse fit and then glue (Zap-A-Gap) it under the flange.  Of course, scuff the mating surfaces with #80 grit sandpaper for best adhesion.
Make final adjustments with a small PermaGrit flat file.  Perfect the Canopy Hook-to-slot fit one at a time.

Note: The canopy shims are included in the eBandit and later BVM jets.

BVM part # PA-SR-0033
12 shims per package
$6.95

You can add this to any other item in your shopping cart to minimize the shipping costs.