Kits Available:




BVM Technical Support: HSDJETSUSAtechsupport@BVMJets.com


HSDJETS S-EDF 105mm Super Viper Red Colors PNP 12S Glossy


Pricing and availability subject to change without notice.
If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

Click on images to enlarge

Wingspan: 1500mm (59.1in)
Length: 1663mm (65.5in)
Flying Weight: 5kg (11 lb) with 12S Battery
S-EDF/Motor: S-EDF 105mm 4258/700KV brushless
Number of EDF Blade: 11 blades
Cruising speed: about 180 km/h
Flying time: about 3-5 mins
Wing area: 34.28 dm2
Wing load: 145.9 g/dm2
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level: □Zero basis □Beginner ■Intermediate □Advanced
PNP Assembly difficulty: □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature: 0C-40C
Radio System: 7 channel (required & not included)
ESC: 160A/12S Hobbywing AS150
UBEC: 6A (2P Du-Pont and JR connector)
Control System Integrated Mix-Control system

25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25gx2 Metal gear with 480mm lead (Flap forward)
25gx2 Metal gear with 80mm lead (Elevator forward)
12gx1 Metal gear with 450mm lead (Nose wheel steering forward)
12gx1 Metal gear with 300mm lead (360 lock Hatch cover forward)
Recommended Receiver Battery: 2S,7.4V,1800-2000mAh,LiPo with T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: Yes
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
General landing gear control system: Yes
LED lights system: Yes
Electromagnetic brake system: Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/132.5x46x39.5(cm)
CG (Center of Gravity) 6.69in from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Cockpit canopyx1
Main wing aluminum tube L=598mm external diameter 16mmx1
Horizontal Stabilizer tube L=500mm external diameter 6mmx1
Accessories Bag 1 x1
Screw (PWM4x35mm)x4 (Nose)
Screw (PM3x14mm)x2 (Wing)
Screw (PM3x10mm)x2 (Wing)
Screw (PA2x12mm)x4
Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer)

7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5000-6000 mAh LiPo with AS150 type connectorx2 (required & not included)
2S,7.4V,1800-2000 mAh LiPo with T type connectorx1 (required & not included)
LiPo battery charger (required & not included)



click on images to enlarge



Q: What does KIT means?

A: It means aircraft comes without any electronic equipment, such as motor, ESC, servos, remote control, battery, etc. Clients have to buy these equipment themselves.


Q: What does KIT+L means?

A: It's a KIT version but comes with landing gear installed.


Q: What does PNP means?

A: It means the aircraft got equipment already installed and tested, but clients have to buy remote control, receiver, battery and the charger themselves. For example: servos, ESC, power system, landing gear, control system (UBEC included but no power supply), light cables (according to the model of aircrafts). It's a 90% installation. Note: turbojet series products do not include turbojet engine.


Q: What does PNP+T means?

A: It's a PNP version with engine (general means turbine) installed and tested. It's a 95% installation.


Q: What does RTF means?

A: It means the aircraft comes with completely equipment installation (including battery supply, charger, remote control and receiver). It's a 100% installation.



Contact Us
All graphics, photos, and text Copyright 2020 BVM, Inc.
Use of graphics or photos without written permission from BVM is strictly prohibited.