Up       

Kits Available:

 

 


 

BVM Technical Support: HSDJETSUSAtechsupport@BVMJets.com

 

 

 

HSDJETS HJ-10 Foam Turbine CAF NEW (DARK BLUE) Colors KIT
 

 

      

Pricing and availability subject to change without notice.
If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

SPECIFICATIONS:
Wingspan 1300 mm (51.2 in)
Length 2115 mm (83.3 in)
Weight ---
Turbine Engine 8KG-12KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 64 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
KIT Assembly difficulty □☆10mins □★☆30mins ■★★60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 10 channel (required & not included)
Control System MFC-2085 (required & not included)


Servos (required & not included)
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
 

Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Canard wing Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Vectoring nozzle Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/60 21.3 14.8(inch)
CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
 

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Canard wingx1 pcs
Air inletx1 pcs
Caudal finx1 pcs
1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs
2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA3x10mm)x6 pcs (Horizontal tail)
Screw (HM3x65mm)x2 pcs (Wing)
Screw (HM4x45mm)x4 pcs (Wing)
Screw (HM3x6mm)x4 pcs (Vertical tail / Nose)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
 

REQUIRES:
8KG-12KG turbine engine (required & not included)
10 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)


Servos
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)

 

HSDJETS Turbojet HJ-10 Assembly and Pre-Flight Instructions




















 


 
   
   
   
   
   
   
   
   
   
   
   

 

Q: What does KIT means?

A: It means aircraft comes without any electronic equipment, such as motor, ESC, servos, remote control, battery, etc. Clients have to buy these equipment themselves.

 

Q: What does KIT+L means?

A: It's a KIT version but comes with landing gear installed.

 

Q: What does PNP means?

A: It means the aircraft got equipment already installed and tested, but clients have to buy remote control, receiver, battery and the charger themselves. For example: servos, ESC, power system, landing gear, control system (UBEC included but no power supply), light cables (according to the model of aircrafts). It's a 90% installation. Note: turbojet series products do not include turbojet engine.

 

Q: What does PNP+T means?

A: It's a PNP version with engine (general means turbine) installed and tested. It's a 95% installation.

 

Q: What does RTF means?

A: It means the aircraft comes with completely equipment installation (including battery supply, charger, remote control and receiver). It's a 100% installation.

 

 

Contact Us
All graphics, photos, and text Copyright 2023 BVM, Inc.
Use of graphics or photos without written permission from BVM is strictly prohibited.