Up       

Kits Available:

 

 


 


BVM Technical Support: HSDJETSUSAtechsupport@BVMJets.com

 

 

HSDJETS HL-39 Foam Turbine Blue Camo Colors PNP XT60 plug

(ETA is Late August)

$1,599.90
Old Price: $1,889.90

FREE SHIPPING within the Continental United States

           
Click on images to enlarge

Preorder instructions:

This item is available for a pre-order. It is not in stock now but is expected to arrive at the USA warehouse on or about Late August, 2020.

Only specifically marked items are available for preordering. These are items that have already shipped from the factory and are on the way to the USA based warehouse now. HSDJETSUSA cannot “reserve” any product unless the customer pays 100% of the retail price at the time of the preorder. The preordered item will ship without delay as soon as it arrives at the USA warehouse. Any other items included in the order that contains the preorder item, will ship all at once when the preordered item ships from the USA warehouse. There is a 5% restocking fee for cancelled preorders.

 

SPECIFICATIONS:

Wingspan: 1665 mm (65.6 in)
Length: 1916 mm (75.4 in)
Flying Weight: 10.5kg (23.1 lb) with 1800cc Aviation kerosene and 750cc smoke
Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed: 100
140 km/h
Flying time: 4
6 mins (full throttle)
Wing area: 54 dm2
Wing load: 195 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: □Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty: □
10mins ■★☆30mins □★★60mins
Suitable for ambient temperature: 0C-40C
Radio System:9 channel (required & not included)
Control System: MFC-2085

Servos
7.4V 25g×2 Metal gear with 80mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 80mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (Elevator×2 & Rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Retarder plate forward)

Recommended Battery: 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons: Yes
Flaps: Yes
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
LED lights system: Yes
Electromagnetic brake system: Yes
Retarder plate: Yes
Smoke System: Selective configuration (not included)
Reinforced gyro: Selective configuration (not included)
Packaging / Size: Packing Box + Outer Box (Card mark)/52.87×20.28×17.72(inch)
CG (Center of Gravity): 120
125mm from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gear×3
Battery Charger: LiPo battery charger (required & not included)

PACKAGE INCLUDES:

Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=598mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=598mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=600mm external diameter 6mm×1 pcs
Accessories Bag×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM4×10mm)×8 pcs (Wing)
Screw (PWM6×70mm)×8 pcs (Nose)
100mm signal line(JR male + JR male)×8 pcs
Pneumatic tube×2 pcs
Cue streamers×1 pcs
Buckle×1 pcs
Anti-corrosion rubber plug×1 pcs
Manual×1 pcs

REQUIRES:

SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

 

HSDJETS Turbojet-HL-39 Assembly.pdf

 


















click on images to enlarge

   
   
   
   
   
   
   
   
   
   
   
   

 

Q: What does KIT means?

A: It means aircraft comes without any electronic equipment, such as motor, ESC, servos, remote control, battery, etc. Clients have to buy these equipment themselves.

 

Q: What does KIT+L means?

A: It's a KIT version but comes with landing gear installed.

 

Q: What does PNP means?

A: It means the aircraft got equipment already installed and tested, but clients have to buy remote control, receiver, battery and the charger themselves. For example: servos, ESC, power system, landing gear, control system(UBEC included but no power supply), light cables(according to the model of aircrafts).It's a 90% installation. Note: turbojet series products do not include turbojet engine.

 

Q: What does PNP+T means?

A: It's a PNP version with engine(general means turbine) installed and tested. It's a 95% installation.

 

Q: What does RTF means?

A: It means the aircraft comes with completely equipment installation(including battery supply, charger, remote control and receiver). It's a 100% installation.

 

 

Contact Us
All graphics, photos, and text Copyright 2020 BVM, Inc.
Use of graphics or photos without written permission from BVM is strictly prohibited.