Kits Available:




BVM Technical Support: HSDJETSUSAtechsupport@BVMJets.com


HSDJETS 1800mm SUPER VIPER FRP Turbine Triangular Star Colors PNP



Pricing and availability subject to change without notice.
If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

Click on images to enlarge

Wingspan 1800mm (70.87in)
Length 2000mm (78.74in)
Flying Weight 10.88kg (23.94 lb) w/o complete engine, w/battery & 3200cc oil
Recommended engine thrust 10
-12 kg / 20-26.4 (lb)
Cruising speed 260 km/h
Flying time 6-8 mins
Wing area 67.94 dm2
Wing load 174.57 g/dm2
Main material FRP
Painting surface Highlight environmental protection paint + decal
Suitable experience level □Zero basis □Beginner □Intermediate
PNP Assembly difficulty □10mins
30mins □60mins
Suitable for ambient temperature 0
Radio System 8 channel (required & not included)
Control System MFC-2085
Recommended Receiver Battery 2S / 7.4V / 5200 mAh Li-Po XT60 Plug×2 PCS(required & not included)
Recommended Power Battery According to engine matching (required & not included)

25gx3 Metal gear with 90mm lead (Left & right ailerons & rudder, forward)
25gx2 Metal gear with 90mm lead (Flap, forward)
25gx2 Metal gear with 90mm lead (Elevator, forward)
12gx1 Metal gear with 500mm lead (Nose wheel steering, forward)
12gx1 Metal gear with 500mm lead (Front landing gear cover plate, forward)

Servo material 7.4V high-voltage high-speed metal gear, aluminum middle shell digital
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
Smoking system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Outer box (extra hard carton) + Inner box (extra hard carton) + Card strip/1400x485x720 (mm)
CG (Center of Gravity) 180
-185 mm leading edge of main wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Cockpit canopyx1
Main wing carbon tube L=850mm external diameter 20mmx1
Horizontal Stabilizer tube L=425mm external diameter 8mmx1
Accessories Bag 1 x1
Screw (HA3x14mm)x6 (Engine)
Oil tank overflow exhaust seat plugx1
Marking tapex1
100mm signal linex8
100mm High precision Y-linex1
Manualx1(Temporarily lacking)

8 channel radio system (radio & receiver) (required & not included)
2S / 7.4V / 5200 mAh Li-Po XT60 Plugx2 PCS (required & not included)
According to engine matching Power Batteryx1(required & not included)
LiPo battery charger (required & not included)




Q: What does KIT means?

A: It means aircraft comes without any electronic equipment, such as motor, ESC, servos, remote control, battery, etc. Clients have to buy these equipment themselves.


Q: What does KIT+L means?

A: It's a KIT version but comes with landing gear installed.


Q: What does PNP means?

A: It means the aircraft got equipment already installed and tested, but clients have to buy remote control, receiver, battery and the charger themselves. For example: servos, ESC, power system, landing gear, control system (UBEC included but no power supply), light cables (according to the model of aircrafts). It's a 90% installation. Note: turbojet series products do not include turbojet engine.


Q: What does PNP+T means?

A: It's a PNP version with engine (general means turbine) installed and tested. It's a 95% installation.


Q: What does RTF means?

A: It means the aircraft comes with completely equipment installation (including battery supply, charger, remote control and receiver). It's a 100% installation.



Contact Us
All graphics, photos, and text Copyright 2021 BVM, Inc.
Use of graphics or photos without written permission from BVM is strictly prohibited.