SPECIFICATIONS:

Wingspan: 1500mm (59.1in)
Length: 1663mm (65.5in)
Flying Weight: 6.5kg (14.3 lb)
Turbine Engine:SW60 6KG brushed / SW60B 6KG brushless (required & not included)
Cruising speed:250 km/h
Flying time: 5 mins (full throttle)
Wing area: 34.28 dm2
Wing load:189.6 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: □Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty:  □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature: 0℃～40℃
Radio System 8 channel: (required & not included)
Control System MFC-2085

Servos
25g×2 Metal gear with 480mm lead (left & right ailerons forward)
25g×3 Metal gear with 190mm lead (Flap×2 & rudder×1 forward)
25g×2 Metal gear with 80mm lead (elevator forward)
12g×1 Metal gear with 300mm lead (Nose wheel steering forward)
12g×1 Metal gear (360°lock Hatch cover forward)

Recommended Battery 2S,7.4V,1800～2000mAh×2,LiPo with T type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/132.5×46×39.5(cm)
CG (Center of Gravity) 170mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselage×1
Left Wing×1
Right Wing×1
Left Horizontal Stabilizer×1
Right Horizontal Stabilizer×1
Vertical Stabilizer×1
Nose×1
Cockpit canopy×1
Main wing carbon tube L=598mm external diameter 16mm×1
Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
Sticker×1
Capping board×1
Accessories Bag 1 ×1
Nylon rocker arm of the servo ×2
Double sided sponge paper×1
Screw (HM4×35mm)×4 (Nose)
Screw (HM3×14mm)×2 (Wing)
Screw (HM3×10mm)×2 (Wing)
Screw (PA3×14mm)×4 (Engine)
Screw (PA3×10mm)×4 (Tail nozzle)
Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
Accessories Bag 2 ×1
L type 3mm inner six corner board hand×1
Screw (HM4×35mm)×4 (Nose)
Screw (HM3×14mm)×2 (Wing)
Screw (HM3×10mm)×2 (Wing)
Screw (PA3×14mm)×4 (Engine)
Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
Manual×1

REQUIRES:
SW60 6KG brushed / SW60B 6KG brushless (required & not included)
8 channel radio system (radio & receiver) (required & not included)
2S,7.4V,1800～2000mAh×2,LiPo with T type plug (required & not included)
LiPo battery charger (required & not included)