|
Jet Central "SE" Smart Electronics ECU System
Metallic robust HDT
Safety acceleration flameout prevention
Self-adjusting features
Easy fine tuning, do more with less adjustment
Simple, graphic navigation menus
Keep track of your telemetry with an easy to use
interface
One-click altitude compensations
All the information you need in an easy to read display
The JET CENTRAL TURBINES ENGINES are in its own right a
single stage centrifugal flow gas turbine engine,
configured to operate as a TURBOJET ENGINE for use
mainly, but not exclusively, in remotely piloted fixed
wing aircraft. Such aircraft and their control systems
must be appropriately designed and constructed to be
compatible with the performance of the TURBOJET ENGINE.
Kerosene Start
Engine ready for installation, with the newest in ECU's.
All motors tested at over 6000 ft.
Lifetime Warranty
Cheetah Turbine Complete Set with Auto Start includes
Turbine Engine with integrated ECU
Hard Case
SE POWERPACK Unit
Clear Fuel Line 4mm
Clear Kerosene Start Line 3mm
Clear Fuel Line 6mm
3 Cell LiFePo Battery
Accessory Box
On/Off Manual Festo Valve (6mm.)
Hanger 9 Fuel Filter
S-Bus / Power Cable
USB Flash with Manuals
SE Hand Data Terminal (HDT)
JR Style Receiver throttle cable
Manual Download click here
Thrust: 160 Newtons. 16.33 kg (36 lbs) @ 130,000 RPM
Idle Thrust: 0.5 kg (1.1 lbs)
RPM Range: 35,000 – 130,000
Weight: 1.3 kg (2.866 lbs) with starter
Diameter: 102.4 mm (4.031 in)
Length: 249.9 mm (9.838 in) with starter
Exhaust Gas Temperature: 500º C – 720º C
0.6 lt/min (21 oz/min) @ 130,000 RPM |
