Home Up YAK Parts

Fuel System Flush Mount Fitting | Customer Hotshots  | Touch-Up Paint  | Central Control Unit (CCU) Instructions  | What is Go Fly Gold? 

 

BVM YAK-130
1:4.85 Scale


 

PRICE $7,399.00
includes freight shipped within the USA

Includes NEW BVM branded Servos

What is Go Fly Gold? 


Greg Arnette

Winning Awards!

Super Jets South - Best Military
Jets Over Kentucky - Special Recognition
12 O'Clock High - Special Recognition
Tiger Meet Jet Rally - Best Military Performance

 

New News:  The Tiger Meet in Scranton, South Carolina was well attended. The YAK's sturdy landing gear performed well on the grassfield.

Wingspan: 79"
Length: 94"
Weight: 34# ready for fuel
Engine: 140-160 Newtons

  There have been 3 prototype models built and flown.  They were flown and displayed at Kentucky Jets, Super Jets South, and 12 O'Clock High. The YAK-130 won prestigious scale and flying awards at all three events. The BVM staff has worked closely with representatives of the factory staff to bring to market a product worthy of the BVM brand name.

  About 150+ successful flights have been accomplished allowing us to evaluate the engine installation, fuel system, pneumatic systems, landing gear and door systems, control travels, center of gravity, gyro application, etc.

  A typical BVM manual has been prepared to allow you to apply 12-15 hours of hobby time to prepare the YAK-130 for flight. You add radio receiver, batteries, BVM U.A.T., pilot, and a 140 class engine.

 The Go Fly features of the YAK are very similar to the BVM F-16 and Cougar.

  A Factory installed smoke system and very scale landing gear and doors are included. The BVM manual allows most jet guys to get it flight ready in a few days of modeling time.
 

 

Production units available now!


 

  Frankie Mirandes and son Ricardo came to Orlando for a few days of recreational jet flying (October 2015). Frankie got a ride on Greg Arnette's YAK-130 and Ricardo was practicing for Red Flag with his BVM Electra on EVF 12S "9er" power. The flying skills and love of jets runs in the family.

BVM Servos Now Installed in   Models

BVM servos (32kg) are now installed in our YAK130 1:4.85 scale model.

The NEW BVM Servos offer a higher resolution than the previously installed servo's.

The 32kg are HV, Digital, and Brushless.

Made by a well known manufacture in Taiwan.

Only available with a model purchase. Not available for individual sale.

  BLS 320 Specifications:
Torque @ 7.4v - 32.0kg/444.4oz-in
Speed @ 7.4v - 0.12 sec/60 deg
Refresh Rate: 333Hz
Motor Type: Brushless
Resolution (4096)
     

 
Controls QTY Servo Type
Steering 1 32kg
     
Aileron 2 32kg
     
Flap 2 32kg
     
Rudder 1 32kg
     
Elevator 2 32kg

 

BVM Products:
Received with the Instruction Package that is sent from BVM

Laser Cut Ply U.A.T. Tray

Laser Cut Ply Gyro Mount

● #2 Button Head Screws

● Carbon "L" Bracket

● #10 Screws to replace Turbine Mounting Screws

● 8" Tie Wraps for Equipment Board

● 4" Tie Wraps for Wires and Air Lines

● Yak-130 Construction and Operation Manual

● Laser Cut Ply Alternate Rear Service Mount
 

PRICE $7,399.00
includes freight shipped within the USA

What is Go Fly Gold? 

 

 

Items Needed To Complete:
Available from BVM

 

Pulse Ultra Batteries

You may have some of these products in your shop, but if not, refer to this list.

 

1/5 scale pilot figure

BVM UAT

Spektrum 12120 Power Safe Receiver

● Spektrum X-Plus 8 Expansion Module

● 2 x 7.4v Batteries 3000 mAh each.

● 140N engine of your choice.

● Demon Cortex Gyro

● Cortex USB PC Adapter
 

Recommended Accessories:


To finish the YAK-130 these products are helpful.


List of Adhesives/Lubricants:

Required Tools:
From Hardware Supply Stores

● 3mm long driver

Metric Allen wrench set

● 9/64" Long Ball Driver

● 90 Head Dremel Tool

Options:


#V-WB 15" JET PILOT     15" Pilot   $139.99

Paint Schemes:
 

#K7900-01
   
#K7900-04
 
#K7900-05
   

#K7900-02

   

You can call Patty at 407-327-6333 and help us get your YAK-130 ownership underway.

Note:  David Ribbe of Flex Innovations.com has a new Aura Gyro that can be factory set for your YAK-130. Thus far, the YAK has been flown with the Aura and the Cortex Demon Gyros. BVM first flies and trims the model with no gyro assist. Then, of course, your flight presentation can be enhanced with a properly set-up gyro of your choice.

 

Contact Us
All graphics, photos, and text Copyright 2018 BVM, Inc. 
Use of graphics or photos without written permission from BVM is strictly prohibited