Up

What are Turn Key Jets from BVM?
They are excellent examples of good craftsmanship and most of them have been flown dozens of times. Each has its own pedigree of builder and pilot; some have been used by the BVM Factory Team. All have been kept in top notch condition.

If time is your shortest commodity and you want to own a high quality jet model then Turn Key Jets offered by BVM can't be beat. Because they have been flown, the systems of the model have been proven and that's another great time saver.

Serious inquiries only for purchasing one of these models can be made at 407-327-6333.

 

 

BVM F-86 1:5.8 scale

Turnkey

$8,900 BNF

 

  This magnificent looking BVM 1/5.8 F-86 was expertly setup by BVM’s Rob Lynch and flown by a BVM Team Member.  It features the upgraded BVM servos, a JetsMunt 166 with 4.8 hours on it, a Spektrum AR201310T (I have an IX20 file available upon request), and a Bavarian Demon Cortex Pro.  It is finished in a very nice looking gloss finish in John Glenn’s MiG Mad Marine colors.  This airframe has less than 50 flights on it. 

 

Video of it flying here: https://youtu.be/KpADEiZWRTo


click on images to enlarge
 

   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

 

BVM  F-100D

Turnkey

$12,700

Reduced Price  $12,200   O.B.O.

 

BVM F-100 with almost all the Bells & Whistles!

* Ready to transfer setup files from my DX-18 Radio to yours then ready to fly!

* Ready for more scale detail if desire such as weathering…. $90 worth of Hot Section Paint goes with it!

* Detail Scale Cockpit

* Scale Drop Tanks & Ordinance

* Extra AMT Pegasus Engine…Very Low Time! ... Needs ECU!    Can be converted to Elec. Auto Start!

* All documentation, logs, inspections, etc.

* Over $14K invested…

* Over 60 Flights with AMT Pegasus Engine- Old Air / Propane Start

* Over 12 Flights with new IQ Hammer 180….Electric Auto Start on Diesel!  Plenty of Power!

* New Paint & Nomenclature-Ready for Weathering & More!

* New AR20310T 20 Channel Spectrum Telemetry Receiver

* New  SPMSA 6320 HV Servos (Ail, Flaps, Stabilator x 2 & Rudder)

* New  SPMA 9574 Airspeed Sensor

* New SPMA 9585  3 Axis G Force Sensor

* Telemetry Receiver & Fuel Pump Batteries monitored

* PULSE 3600mAh 2S 7.4V 15C LiPo Receiver Battery x 2

* Lipo 2200 mAh fuel pump battery

* BVM E-Brake V2....Works Great!   Also have a BVM smooth stop… works great!

* UNL-RING125 UniLight Afterburner Ring with ABM28A Controller

* UNL-MOD 83001 8 Channel Pro Light Controller

* UNL-FLIP 30W Drop Out Spot / Landing Light

* Have UniLight Beacons & Strobes…ready to install!

Photos by Andrew Griffith

   
   

   

   

   

   

   

   

   

   

   
   

 

 

 

Contact Us
All graphics, photos, and text Copyright 2021 BVM, Inc. 
Use of graphics or photos without written permission from BVM is strictly prohibited.